Method for determining the migration of aromatic primary amines from food contact materials and articles using Anyeep TQ9120

This study utilizes the Anyeep TQ9120 ultra-high-performance liquid chromatography-tandem mass spectrometry system from Anyeep to establish a method for quantifying the migration of 29 aromatic primary amines in food-contact materials and articles. The method demonstrates excellent linearity, with detection and quantification limits meeting relevant standard requirements. Using this method and equipment enables the detection and quantification of multiple aromatic primary amines in food-contact materials and articles.
Introduction
Aromatic primary amines (PAAs) are a class of chemicals widely used in the manufacturing of plastics, rubber, and dyes. Some PAAs are classified as carcinogens by the International Agency for Research on Cancer (IARC), including aniline, benzidine, and 4,4.’- methylene diphenyl diamine, etc. When used in food-contact materials, they pose a serious health risk to humans.
This study developed a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method to simultaneously quantify the migration of 29 aromatic primary amines, in accordance with the requirements of GB 31604.52-2021 National Food Safety Standard for Determination of Migration Amount of Aromatic Primary Amines in Food Contact Materials and Products. The method demonstrates high sensitivity, excellent linearity, and meets all standard requirements for precision and accuracy.
Instruments and Reagents
Anyeep TQ120 Ultra-High Performance Liquid Chromatography-Tandem Mass SpectrometrySystem
Acetonitrile, Methanol(MS-grade, from Thermo Fisher Scientific, USA)
Formic acid (mass spectrometry grade, CNW Technologies, Germany)
Acetic acid, ethanol (chromatographic grade, CNW Technologies, Germany)
29 Aromatic Primary Amine Standards (ANPEL, Shanghai)
Liquid Chromatography Conditions
Mobile PhaseA: 0.1% formic acid, water
Mobile Phase B: Acetonitrile
Chromatography column: Waters Acquity UPLC HSS T3, 1.7μm, 2.1×100 mm
Column Temperature:40 ℃
Flow rate: 0.2 mL/min
Injection volume:2 μL
Mass Spectrometry Conditions
Ionization Source: Electrospray Ionization Source (ESI)+)
Source Temperature: 550 ℃
Spray Voltage: 5000 V
air curtain: 30 psi
Mist gas: 50 psi
Auxiliary Gas: 70 psi
Crash: 11
Scan Mode:MRM
Gradient elution program
Timemin | A% | B% | Flow RatemL/min |
0.0 | 95 | 5 | 0.2 |
0.5 | 95 | 5 | 0.2 |
10.0 | 5 | 95 | 0.2 |
12.0 | 5 | 95 | 0.2 |
12.1 | 95 | 5 | 0.2 |
19.0 | 95 | 5 | 0.2 |
Analyte MRM Parameters
No. | Test Item | Q1 Ion | Q3 Ion | CE (V) | DP (V) | Detection Window (min) |
1 | p-Phenylenediamine | 109.1 | 92.05* | 11 | 60 | 1.2 |
|
| 109.1 | 65.05 | 20 | 60 | 1.2 |
2 | m-phenylenediamine | 109.1 | 92.0* | 11 | 60 | 1.4 |
|
| 109.1 | 65.0 | 20 | 60 | 1.4 |
3 | 2,4-diaminotoluene | 123.1 | 77.0 | 25 | 160 | 2.0 |
|
| 123.1 | 106.1* | 10 | 100 | 2.0 |
4 | Aniline | 94.2 | 77.0 | 12 | 140 | 2.3 |
|
| 94.2 | 51.0* | 28 | 80 | 2.3 |
5 | 4,4′-Diaminodiphenyl ether | 201.2 | 80.0 | 31 | 120 | 2.3 |
|
| 201.2 | 108.1* | 13 | 100 | 2.3 |
6 | Benzidine | 185.2 | 168.2* | 11 | 100 | 2.4 |
|
| 185.2 | 167.1 | 23 | 100 | 2.4 |
7 | 4,4′-diaminodiphenylmethane | 199.2 | 106.05* | 11 | 20 | 3.3 |
|
| 199.2 | 77.05 | 46 | 20 | 3.3 |
8 | o-Anisidine | 124.1 | 109.1* | 12 | 80 | 3.9 |
|
| 124.1 | 80.0 | 25 | 220 | 3.9 |
9 | o-Toluidine | 108.1 | 93.0* | 10 | 140 | 4.4 |
|
| 108.1 | 91.0 | 12 | 140 | 4.4 |
10 | 2,6-dimethylaniline | 122.1 | 107.05* | 9 | 80 | 7.0 |
|
| 122.1 | 105.05 | 10 | 100 | 7.0 |
11 | 3,3-Dimethoxybenzidine | 245.2 | 230.1* | 12 | 80 | 7.1 |
|
| 245.2 | 213.2 | 12 | 120 | 7.1 |
12 | 3,3-dimethyldiphenylamine | 213.1 | 196.1 | 14 | 120 | 7.1 |
|
| 213.1 | 180.1* | 32 | 80 | 7.1 |
13 | 2,4-Diaminoanisole | 139.1 | 124.1* | 9 | 80 | 7.1 |
|
| 139.1 | 107.1 | 20 | 60 | 7.1 |
14 | 3-Amino-p-tolyl methyl ether | 138.1 | 123.1* | 9 | 80 | 7.1 |
|
| 138.1 | 106.1 | 18 | 80 | 7.1 |
15 | 3,3′-dimethyl-4,4′-diaminodiphenylmethane | 227.1 | 178.1 | 25 | 200 | 7.1 |
| 227.1 | 120.1* | 20 | 180 | 7.1 | |
16 | 2,4′-diaminodiphenylmethane | 199.2 | 106.1* | 12 | 40 | 7.1 |
|
| 199.2 | 77.1 | 43 | 40 | 7.1 |
17 | p-Chloroaniline | 128.1 | 66.0 | 25 | 60 | 7.2 |
|
| 128.1 | 93.1* | 10 | 100 | 7.2 |
18 | 2,4,5-Trimethylaniline | 136.1 | 121.1 | 9 | 60 | 7.8 |
|
| 136.1 | 119.1 | 10 | 60 | 7.8 |
19 | 4,4′-diaminodiphenyl sulfide | 217.1 | 200.0 | 13 | 100 | 8.3 |
|
| 217.1 | 124.1* | 14 | 100 | 8.3 |
20 | 2,4-dimethylaniline | 122.1 | 107.1 | 9 | 80 | 8.3 |
|
| 122.1 | 105.1* | 10 | 100 | 8.3 |
21 | 2-Naphthylamine | 144.1 | 127.0* | 19 | 120 | 8.5 |
|
| 144.1 | 117.0 | 12 | 100 | 8.5 |
22 | 2,2′-diaminodiphenylmethane | 199.2 | 106* | 12 | 40 | 8.9 |
|
| 199.2 | 77.0 | 43 | 40 | 8.9 |
|
|
|
|
|
|
|
23 | 4-Chloro-o-toluidine | 142.1 | 125.0 | 14 | 80 | 9.8 |
|
| 142.1 | 107.1* | 10 | 100 | 9.8 |
24 | 4-Aminobiphenyl | 170.1 | 153.1 | 14 | 100 | 9.8 |
|
| 170.1 | 152.1* | 24 | 100 | 9.8 |
25 | 2-amino-4-nitrotoluene | 153.2 | 107.1* | 11 | 60 | 10.1 |
|
| 153.2 | 90.0 | 19 | 40 | 10.1 |
26 | 3,3-Dichlorobenzidine | 253.1 | 217* | 15 | 160 | 11.6 |
|
| 253.1 | 182.1 | 23 | 100 | 11.6 |
27 | p-Aminoazobenzene | 198.2 | 77.1* | 10 | 80 | 11.7 |
|
| 198.2 | 93.2 | 20 | 60 | 11.7 |
28 | 4,4′-Methylene-bis(2-chloroaniline) | 267.1 | 195.1* | 28 | 120 | 11.8 |
| 267.1 | 140.0 | 28 | 100 | 11.8 | |
29 | o-Aminoazotoluene | 226.3 | 121.1* | 16 | 120 | 13.0 |
|
| 226.3 | 91.1 | 14 | 120 | 13.0 |
Note: * denotes quantitative ion pairs; detection window is ±0.5 min.
Sample Processing
Matrix-matched reference standard working solution:Accurately pipette 1 mg/L aromatic amine standard solution, 1.0 μL, 20 μL, 50 μL, 100 μL, 200 μL, 500 μLIn 10 mL volumetric flasks, dilute to volume with 4% acetic acid and 20% ethanol separately to obtain aromatic primary amine concentrations of1.0 μg/L, 2.0 μg/L, 50 μg/L, 10.0 μg/L, 20.0 μg/L, 50.0 μg/Lstandard working solution.
Quality Control Sample:Accurately pipette 1 mg/L of the aromatic primary amine standard solution: 30 μL, 150 μL, 400 μLIn 10 mL volumetric flasks, dilute to volume with 4% acetic acid and 20% ethanol separately to obtain aromatic primary amine concentrations of3.0 μg/L, 15.0 μg/L, 40.0 μg/LQuality control solution.
Linear Range
4% Acetic Acid
No. | Test Item | Retention Time min | Limit of Detection μg/L | Linear Range μg/L | Linear Equation 1/x2Weighted | correlation coefficient r2 |
1 | p-Phenylenediamine | 1.152 | 0.2 | 1-50 | Y=1219.6*X-517.654 | 0.9987 |
2 | m-Phenylenediamine | 1.353 | 0.1 | 1-50 | Y=7289.83*X-432.706 | 0.9957 |
3 | 2,4-diaminotoluene | 1.982 | < 0.1 | 1-50 | Y=5505.79*X-414.453 | 0.9962 |
4 | Aniline | 2.263 | 0.5 | 1-50 | Y = 2219.14*X + 558.136 | 0.9987 |
5 | Benzidine | 2.358 | < 0.1 | 1-50 | Y = 6663.75*X + 216.068 | 0.9945 |
6 | 4,4′-Diaminodiphenyl ether | 2.358 | < 0.1 | 1-50 | Y = 6787.3*X + 440.746 | 0.9931 |
7 | 4,4′-diaminodiphenylmethane | 3.253 | 0.1 | 1-50 | Y = 3031.93*X + 338.499 | 0.9968 |
8 | o-Anisidine | 3.667 | < 0.1 | 1-50 | Y = 22974.4*X + 2519.68 | 0.9973 |
9 | o-Toluidine | 3.945 | 0.2 | 1-50 | Y = 5060.58*X + 50.8596 | 0.9977 |
10 | 3,3′-dimethyl-4,4′-diaminodiphenylmethane | 4.616 | < 0.1 | 1-50 | Y = 6064.7*X + 854.082 | 0.9957 |
11 | 3,3-Dimethoxybenzidine | 4.695 | < 0.1 | 1-50 | Y=1546.53*X-97.621 | 0.9971 |
12 | 3,3-dimethyldiphenylamine | 4.695 | < 0.1 | 1-50 | Y = 8867.46*X + 458.538 | 0.9959 |
13 | 2,6-dimethylaniline | 4.722 | < 0.1 | 1-50 | Y=22943.8*X-1186.4 | 0.9939 |
14 | 2,4′-diaminodiphenylmethane | 4.762 | 0.2 | 1-50 | Y=390.721*X-176.96 | 0.9941 |
15 | 2,4-Diaminoanisole | 4.802 | < 0.1 | 1-50 | Y = 2866.39*X + 145.587 | 0.9973 |
16 | 3-Aminoanisole | 4.802 | < 0.1 | 1-50 | Y = 34028.3*X + 1585.27 | 0.9966 |
17 | 2,4,5-Toluidine | 5.283 | < 0.1 | 1-50 | Y = 18497.6*X + 241.282 | 0.9944 |
18 | p-Chloroaniline | 5.677 | < 0.1 | 1-50 | Y = 8912.29*X + 235.55 | 0.9945 |
19 | 4,4′-diaminodiphenyl sulfide | 5.691 | < 0.1 | 1-50 | Y=13885.6*X-373.501 | 0.9965 |
20 | 2,4-dimethylaniline | 6.024 | 0.1 | 1-50 | Y=17452.7*X-52.3845 | 0.9945 |
21 | 2-Naphthylamine | 6.05 | < 0.1 | 1-50 | Y = 32475.9*X + 2136.99 | 0.9950 |
22 | 2,2′-diaminodiphenylmethane | 6.318 | < 0.1 | 1-50 | Y=11125.1*X-274.278 | 0.9966 |
23 | 4-aminobiphenyl | 7.132 | < 0.1 | 1-50 | Y = 19362.6*X + 886.526 | 0.9957 |
24 | 4-Chloro-o-toluidine | 7.279 | < 0.1 | 1-50 | Y = 16527.8*X + 1406.06 | 0.9953 |
25 | 2-amino-4-nitrotoluene | 7.533 | < 0.1 | 1-50 | Y = 10512.8*X + 796.507 | 0.9968 |
26 | 3,3-Dichlorobenzidine | 8.872 | < 0.1 | 1-50 | Y = 13538.9*X + 147.026 | 0.9961 |
27 | 4-Aminoazobenzene | 8.992 | < 0.1 | 1-50 | Y = 33214*X + 1487.21 | 0.9960 |
28 | 4,4'-Methylene-bis(2-chloroaniline) | 9.125 | < 0.1 | 1-50 | Y = 8349.14*X + 408.401 | 0.9961 |
29 | o-Aminoazotoluene | 10.21 | < 0.1 | 1-50 | Y = 8338.7*X + 1952.62 | 0.9971 |
20% ethanol
No. | Test Item | Retention Time min | Limit of Detection μg/L | Linear Range μg/L | Linear Equation 1/x2Weighted | correlation coefficient r2 |
1 | p-Phenylenediamine | 1.152 | 0.2 | 1-50 | Y=5041.32*X-972.642 | 0.9994 |
2 | m-phenylenediamine | 1.353 | 0.1 | 1-50 | Y=7017.26*X+1260.47 | 0.9993 |
3 | 2,4-diaminotoluene | 1.955 | 0.2 | 1-50 | Y=6106.43*X-215.691 | 0.9999 |
4 | Aniline | 2.25 | 0.5 | 1-50 | Y=2579.9*X+1411.99 | 0.9981 |
5 | Benzidine | 2.277 | < 0.1 | 1-50 | Y=5768.45*X-177.699 | 0.9999 |
6 | 4,4′-Diaminodiphenyl ether | 2.331 | < 0.1 | 1-50 | Y=6746.09*X+884.723 | 0.9994 |
7 | 4,4′-diaminodiphenylmethane | 3.213 | 0.2 | 1-50 | Y=3066.58*X-144.181 | 0.9993 |
8 | o-Anisidine | 3.653 | < 0.1 | 1-50 | Y=24406*X-138.795 | 0.9992 |
9 | o-Toluidine | 3.945 | 0.2 | 1-50 | Y=5877.11*X+473.122 | 0.9998 |
10 | 3,3′-dimethyl-4,4′-diaminodiphenylmethane | 4.603 | < 0.1 | 1-50 | Y=5836.1*X+25.8507 | 0.9969 |
11 | 3,3-Dimethoxybenzidine | 4.669 | < 0.1 | 1-50 | Y=5872.9*X+900.726 | 0.9977 |
12 | 3,3-dimethyldiphenylamine | 4.682 | < 0.1 | 1-50 | Y=8833.73*X-577.182 | 0.9997 |
13 | 2,6-dimethylaniline | 4.722 | < 0.1 | 1-50 | Y=22992.3*X+1942.4 | 0.9987 |
14 | 2,4′-diaminodiphenylmethane | 4.736 | 0.1 | 1-50 | Y=2807.49*X+6.1088 | 0.9907 |
15 | 2,4-Diaminoanisole | 4.789 | < 0.1 | 1-50 | Y=2875.63*X-50.0503 | 0.9994 |
16 | 3-Amino-p-tolyl methyl ether | 4.789 | < 0.1 | 1-50 | Y=34774.5*X+2421.75 | 0.9999 |
17 | 2,4,5-Trimethylaniline | 5.256 | < 0.1 | 1-50 | Y=18211.8*X-250.95 | 0.9995 |
18 | p-Chloroaniline | 5.651 | < 0.1 | 1-50 | Y=9995.19*X+1481.37 | 0.9992 |
19 | 4,4′-diaminodiphenyl sulfide | 5.677 | < 0.1 | 1-50 | Y=12000.7*X+2302.42 | 0.9994 |
20 | 2,4-dimethylaniline | 6.011 | 0.1 | 1-50 | Y=18496.9*X+2919.39 | 0.9984 |
21 | 2-Naphthylamine | 6.037 | < 0.1 | 1-50 | Y=35638.8*X-1643.04 | 0.9997 |
22 | 2,2′-diaminodiphenylmethane | 6.318 | < 0.1 | 1-50 | Y=11118.8*X-1322.75 | 0.996 |
23 | 4-Aminobiphenyl | 7.118 | < 0.1 | 1-50 | Y=45025.6*X+1846.67 | 0.999 |
24 | 4-Chloro-o-toluidine | 7.266 | < 0.1 | 1-50 | Y=17759.1*X+104.632 | 0.9998 |
25 | 2-amino-4-nitrotoluene | 7.52 | 0.1 | 1-50 | Y=12343.6*X-908.632 | 0.9993 |
26 | 3,3-Dichlorobenzidine | 8.858 | < 0.1 | 1-50 | Y=13862.9*X-928.536 | 0.9992 |
27 | 4-Aminoazobenzene | 8.979 | < 0.1 | 1-50 | Y=33436.2*X+312.094 | 0.9993 |
28 | 4,4′-Methylene-bis(2-chloroaniline) | 9.112 | < 0.1 | 1-50 | Y=8282.77*X-551.909 | 0.9993 |
29 | o-Aminoazotoluene | 10.21 | < 0.1 | 1-50 | Y=8479.43*X+789.849 | 0.9981 |
Precision and accuracy (using 4% acetic acid as an example)
Test Item | Add label μg/L | 1 | 2 | 3 | 4 | 5 | 6 | Precision | Accuracy |
p-Phenylenediamine* | 3 | 2.40 | 2.38 | 2.02 | 2.11 | 2.03 | 2.04 | 8.25% | 72.11% |
| 15 | 10.21 | 10.35 | 10.27 | 9.58 | 9.83 | 9.37 | 4.07% | 66.23% |
| 30 | 30.19 | 31.57 | 29.37 | 28.56 | 29.15 | 27.96 | 4.33% | 73.67% |
m-phenylenediamine | 3 | 3.18 | 3.13 | 2.96 | 3.12 | 3.16 | 3.15 | 2.56% | 103.89% |
| 15 | 14.23 | 14.61 | 14.58 | 14.48 | 14.88 | 14.69 | 1.49% | 97.19% |
| 40 | 40.22 | 41.58 | 39.47 | 41.37 | 42.23 | 40.73 | 2.44% | 102.33% |
2,4-diaminotoluene | 3 | 2.96 | 2.98 | 2.95 | 2.99 | 2.99 | 2.83 | 2.07% | 98.33% |
| 15 | 14.01 | 13.93 | 14.26 | 13.99 | 14.12 | 13.66 | 1.44% | 93.30% |
| 40 | 38.69 | 39.91 | 36.53 | 38.39 | 38.52 | 38.94 | 2.87% | 96.24% |
Aniline | 3 | 3.04 | 2.96 | 3.13 | 2.88 | 2.60 | 3.05 | 6.41% | 98.11% |
| 15 | 15.01 | 15.20 | 14.39 | 15.26 | 15.51 | 15.09 | 2.50% | 100.51% |
| 40 | 42.46 | 41.07 | 38.85 | 39.92 | 42.04 | 41.76 | 3.38% | 102.54% |
Benzidine | 3 | 3.03 | 2.99 | 2.98 | 2.96 | 3.09 | 2.93 | 1.88% | 99.89% |
| 15 | 14.44 | 14.92 | 14.42 | 14.60 | 14.25 | 14.63 | 1.58% | 96.96% |
| 40 | 40.37 | 40.96 | 38.77 | 40.19 | 40.31 | 41.36 | 2.19% | 100.82% |
4,4′-Diaminodiphenyl ether | 3 | 3.09 | 3.08 | 3.05 | 3.01 | 3.01 | 2.95 | 1.73% | 101.06% |
15 | 14.20 | 14.85 | 14.55 | 14.27 | 14.45 | 14.79 | 1.83% | 96.79% | |
| 40 | 40.25 | 41.64 | 38.63 | 38.50 | 40.44 | 39.63 | 2.98% | 99.62% |
4,4′-diaminodiphenylmethane | 3 | 2.91 | 2.96 | 2.89 | 2.94 | 2.92 | 2.83 | 1.56% | 96.94% |
15 | 14.77 | 14.52 | 14.59 | 14.54 | 14.47 | 14.54 | 0.72% | 97.14% | |
| 40 | 40.52 | 42.49 | 38.10 | 40.42 | 40.21 | 40.56 | 3.45% | 100.96% |
o-Anisidine | 3 | 3.06 | 3.13 | 3.13 | 3.07 | 3.14 | 3.13 | 1.13% | 103.67% |
| 15 | 14.99 | 15.29 | 14.76 | 15.13 | 14.86 | 15.06 | 1.27% | 100.10% |
| 40 | 40.75 | 40.99 | 37.72 | 40.46 | 42.39 | 42.97 | 4.49% | 102.20% |
o-Toluidine | 3 | 3.14 | 3.10 | 3.22 | 3.18 | 3.17 | 3.04 | 2.04% | 104.72% |
| 15 | 14.69 | 15.11 | 14.93 | 15.05 | 15.33 | 14.49 | 2.03% | 99.56% |
| 40 | 41.21 | 41.29 | 38.11 | 40.57 | 41.11 | 40.75 | 2.98% | 101.27% |
3,3′-dimethyl-4,4′-diaminodiphenylmethane | 3 | 3.15 | 3.24 | 3.11 | 3.04 | 3.07 | 3.07 | 2.34% | 103.78% |
15 | 14.66 | 15.27 | 15.49 | 15.06 | 15.23 | 15.40 | 1.95% | 101.23% | |
| 40 | 40.68 | 39.98 | 35.25 | 38.12 | 39.21 | 39.20 | 4.94% | 96.85% |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3,3-Dimethoxybenzidine | 3 | 3.27 | 3.17 | 3.11 | 3.09 | 3.00 | 3.27 | 3.38% | 105.06% |
15 | 14.56 | 14.36 | 14.63 | 14.84 | 14.04 | 14.53 | 1.87% | 96.62% | |
| 40 | 37.90 | 37.16 | 34.10 | 35.19 | 35.73 | 37.58 | 4.15% | 90.69% |
3,3-dimethyldiphenylamine | 3 | 3.09 | 2.98 | 2.87 | 2.92 | 2.95 | 2.98 | 2.49% | 98.83% |
| 15 | 14.34 | 14.36 | 14.49 | 14.41 | 14.37 | 13.94 | 1.35% | 95.46% |
| 40 | 38.09 | 39.41 | 37.03 | 37.00 | 39.59 | 38.86 | 2.99% | 95.83% |
2,6-dimethylaniline | 3 | 3.02 | 3.02 | 2.98 | 3.10 | 3.09 | 3.15 | 2.08% | 102.00% |
| 15 | 15.47 | 15.54 | 15.66 | 15.33 | 15.71 | 15.73 | 1.00% | 103.82% |
| 40 | 42.34 | 42.15 | 39.85 | 41.55 | 43.05 | 43.72 | 3.18% | 105.28% |
2,4′-diaminodiphenylmethane | 3 | 3.28 | 2.79 | 3.42 | 3.21 | 2.74 | 2.81 | 9.71% | 101.39% |
15 | 15.92 | 16.32 | 13.52 | 14.14 | 14.29 | 14.69 | 7.34% | 98.76% | |
| 40 | 43.22 | 34.26 | 41.80 | 39.25 | 39.04 | 42.68 | 8.30% | 100.10% |
2,4-Diaminoanisole | 3 | 3.06 | 3.14 | 3.14 | 3.11 | 3.11 | 3.02 | 1.54% | 103.22% |
| 15 | 14.68 | 15.54 | 14.83 | 15.46 | 14.90 | 14.88 | 2.39% | 100.32% |
| 40 | 40.80 | 40.38 | 38.19 | 39.40 | 41.13 | 41.45 | 3.04% | 100.56% |
3-Amino-p-tolyl methyl ether | 3 | 3.16 | 3.17 | 3.10 | 3.19 | 3.21 | 3.22 | 1.36% | 105.83% |
| 15 | 14.90 | 14.93 | 14.84 | 15.25 | 15.00 | 15.19 | 1.10% | 100.12% |
| 40 | 40.88 | 40.07 | 37.64 | 39.70 | 40.76 | 41.58 | 3.43% | 100.26% |
2,4,5-Toluidine | 3 | 3.04 | 3.07 | 3.16 | 3.18 | 3.16 | 3.08 | 1.88% | 103.83% |
| 15 | 15.50 | 15.25 | 15.27 | 15.03 | 15.48 | 15.22 | 1.15% | 101.94% |
| 40 | 40.99 | 40.75 | 38.10 | 38.93 | 41.51 | 41.52 | 3.57% | 100.75% |
p-Chloroaniline | 3 | 3.20 | 3.22 | 3.06 | 3.24 | 3.12 | 3.11 | 2.27% | 105.28% |
| 15 | 14.70 | 14.95 | 14.54 | 14.77 | 15.06 | 15.03 | 1.38% | 98.94% |
| 40 | 38.96 | 41.77 | 38.30 | 39.96 | 39.21 | 40.35 | 3.08% | 99.40% |
4,4′-diaminodiphenyl sulfide | 3 | 2.95 | 3.11 | 3.09 | 3.17 | 2.91 | 3.09 | 3.30% | 101.78% |
15 | 15.39 | 15.45 | 15.09 | 15.31 | 14.57 | 14.93 | 2.21% | 100.82% | |
| 40 | 40.35 | 40.15 | 37.44 | 40.72 | 42.40 | 39.39 | 4.07% | 100.19% |
2,4-dimethylaniline | 3 | 3.09 | 3.04 | 3.11 | 3.16 | 3.12 | 3.09 | 1.28% | 103.39% |
| 15 | 15.02 | 15.10 | 15.01 | 15.49 | 15.42 | 15.51 | 1.57% | 101.72% |
| 40 | 40.71 | 41.57 | 39.56 | 40.49 | 41.07 | 42.25 | 2.26% | 102.35% |
2-Naphthylamine | 3 | 3.08 | 3.14 | 3.21 | 3.20 | 3.16 | 3.19 | 1.53% | 105.44% |
| 15 | 14.96 | 15.46 | 15.39 | 15.46 | 15.09 | 15.55 | 1.54% | 102.12% |
| 40 | 41.21 | 40.74 | 39.26 | 40.50 | 40.78 | 41.45 | 1.88% | 101.64% |
2,2′-diaminodiphenylmethane | 3 | 3.39 | 3.04 | 3.04 | 3.09 | 3.20 | 3.23 | 4.31% | 105.50% |
15 | 15.45 | 15.92 | 16.85 | 14.60 | 16.55 | 15.19 | 5.39% | 105.07% | |
| 40 | 45.63 | 45.91 | 43.19 | 40.30 | 39.50 | 42.27 | 6.20% | 107.00% |
4-aminobiphenyl | 3 | 3.11 | 3.14 | 3.14 | 3.08 | 3.13 | 3.09 | 0.83% | 103.83% |
| 15 | 15.17 | 15.00 | 14.91 | 15.08 | 15.06 | 15.11 | 0.60% | 100.37% |
| 40 | 39.99 | 41.16 | 39.34 | 41.01 | 40.15 | 40.59 | 1.69% | 100.93% |
4-Chloro-o-toluidine | 3 | 3.12 | 3.09 | 3.17 | 3.12 | 3.15 | 3.11 | 0.92% | 104.22% |
| 15 | 14.62 | 14.99 | 14.79 | 15.09 | 14.73 | 15.28 | 1.66% | 99.44% |
| 40 | 41.14 | 41.45 | 39.51 | 40.64 | 40.48 | 40.90 | 1.65% | 101.72% |
2-amino-4-nitrotoluene | 3 | 3.01 | 3.07 | 3.09 | 3.02 | 3.09 | 3.14 | 1.58% | 102.33% |
| 15 | 14.94 | 14.39 | 14.80 | 14.74 | 14.67 | 14.41 | 1.49% | 97.72% |
| 40 | 40.48 | 41.16 | 37.67 | 41.60 | 40.41 | 38.26 | 4.00% | 99.83% |
3,3′-Dichloridine | 3 | 3.03 | 3.05 | 2.98 | 3.01 | 3.02 | 2.98 | 0.93% | 100.39% |
| 15 | 14.83 | 14.46 | 14.66 | 14.32 | 14.75 | 14.51 | 1.32% | 97.26% |
| 40 | 40.44 | 40.70 | 39.29 | 40.43 | 40.05 | 40.77 | 1.36% | 100.70% |
4-Aminoazobenzene | 3 | 3.03 | 2.99 | 2.98 | 3.03 | 3.00 | 2.94 | 1.13% | 99.83% |
| 15 | 14.58 | 14.94 | 14.58 | 14.51 | 14.57 | 14.33 | 1.36% | 97.23% |
| 40 | 40.16 | 40.65 | 39.44 | 40.32 | 39.63 | 40.52 | 1.21% | 100.30% |
4,4′-Methylene-bis(2-chloroaniline) | 3 | 3.06 | 2.94 | 3.02 | 3.11 | 2.93 | 3.02 | 2.30% | 100.44% |
15 | 14.53 | 14.66 | 14.71 | 14.45 | 14.75 | 14.75 | 0.85% | 97.61% | |
| 40 | 39.86 | 41.18 | 38.90 | 40.19 | 41.37 | 40.64 | 2.27% | 100.89% |
o-Aminoazotoluene | 3 | 2.81 | 2.86 | 2.80 | 2.83 | 2.80 | 2.77 | 1.09% | 93.72% |
| 15 | 13.75 | 13.69 | 13.74 | 13.67 | 13.68 | 13.71 | 0.24% | 91.38% |
| 40 | 37.11 | 38.20 | 36.83 | 36.71 | 36.40 | 36.71 | 1.71% | 92.48% |
*p-PhenylenediamineEasily degrades under acidic conditions
Summary
This article establishes Anyeep TQ9120 Ultra-High Performance Liquid Chromatography-Tandem Mass Spectrometry SystemMethod for Analyzing Migration of Aromatic Primary Amines in Food-Contact Materials and ProductsAs the results show,The method exhibits excellent sensitivity, stability, and a wide linear range.All relevant metrics meet the required standards.Suitable forMigration of Aromatic Primary Amines from Food Contact Materials and ArticlesofRoutine analysis and testing.