Method for Determining 11 Novel Neonicotinoid Pesticides in Milk Using Anyeep TQ9120

This study utilized the Anyeep TQ9120 ultra-high-performance liquid chromatography-tandem mass spectrometry system from Anyeep to establish a method for the simultaneous detection of 11 new neonicotinoid pesticides in milk. The method demonstrated excellent linearity, with limits of detection and quantification meeting relevant regulatory standards. Using this method and equipment enables the detection and quantification of new neonicotinoid pesticides.
Introduction
Neonicotinoid insecticides are a class of neurotoxic pesticides optimized from traditional neonicotinoid structures. They induce paralysis and death in pests by blocking signal transmission in the central nervous system. With their widespread use in agriculture, residues of these insecticides in animal-derived foods have increasingly drawn international concern. Stricter residue limits in export trade have become a significant technical barrier affecting China's exports of animal-derived foods. In 2023, the Ministry of Agriculture and Rural Affairs, Customs, and other departments intensified monitoring and risk warning for pesticide residues in exported livestock, poultry, and aquatic products, while cracking down on illegal usage. Routine testing covers plant-derived foods such as vegetables, fruits, tea, and grains, as well as animal-derived matrices including muscle, liver, kidney, milk, and eggs. Applicable standards include GB 23200.121-2021, GB 2763-2021, GB 2763.1-2022, SN/T 2073-2022, and SN/T 5640-2024. This method is based on SN/T 5640-2024 and employs internal standard quantification.
Instruments and Reagents
Anyeep TQ9120 Ultra-High Performance Liquid Chromatography-Tandem Mass SpectrometrySystem
Acetonitrile, Methanol(MS-grade, from Thermo Fisher Scientific, USA)
Formic acid (MS grade, Anpel)
Extract Salt Pack (Shanghai Anpel, SBEQ-CA8010-BZ)
Liquid Chromatography Conditions
Mobile PhaseA: Water
Mobile Phase B: Acetonitrile
Chromatography column: AnpelAthena UPLC C18 Column, 1.8 µm, 2.1×100 mm
Column Temperature:40 ℃
Flow rate: 0.3 mL/min
Injection volume:2 μL
Mass Spectrometry Conditions
Ionization Source: Electrospray Ionization Source (ESI)+)
Source Temperature: 550 ℃
Spray Voltage: 5000 V
air curtain: 35 psi
Mist gas: 50 psi
Auxiliary Gas: 70 psi
Crash: 8
Scan Mode:MRM
Gradient elution program
Time min | A% | B% | Flow Rate mL/min |
0.0 | 95 | 5 | 0.3 |
1.0 | 95 | 5 | 0.3 |
10.0 | 65 | 35 | 0.3 |
10.5 | 5 | 95 | 0.3 |
11.0 | 5 | 95 | 0.3 |
11.1 | 95 | 5 | 0.3 |
14.0 | 95 | 5 | 0.3 |
Analyte MRM Parameters
No. | Test Item | Q1Ion | Q3ion | CE (V) | DP (V) | Retention Time |
(min) | ||||||
1 | Imidacloprid | 256.0 | 208.9* | 10 | 120 | 8.1 |
|
| 256.0 | 175.0 | 14 | 120 | 8.1 |
2 | Imidacloprid Urea | 212.0 | 128.1* | 14 | 160 | 7.0 |
|
| 212.0 | 78.0 | 42 | 160 | 7.0 |
3 | Imidacloprid Olefin | 254.0 | 205.1* | 6 | 80 | 6.6 |
|
| 254.0 | 171.0 | 22 | 80 | 6.6 |
4 | Acetamiprid | 223.0 | 125.9* | 14 | 140 | 8.7 |
|
| 223.0 | 55.9 | 8 | 140 | 8.7 |
5 | Flupyradifurone | 288.8 | 125.8* | 14 | 100 | 9.5 |
|
| 288.8 | 89.9 | 44 | 100 | 9.5 |
6 | Dinotefuran | 202.9 | 128.8* | 2 | 80 | 4.5 |
|
| 202.9 | 156.8 | 0 | 80 | 4.5 |
7 | N-desmethyl acetamiprid | 209.0 | 126.0* | 12 | 80 | 7.9 |
|
| 209.0 | 90.0 | 30 | 80 | 7.9 |
8 | Thiamethoxam | 250.0 | 169.0* | 6 | 40 | 7.6 |
|
| 250.0 | 132.0 | 10 | 40 | 7.6 |
9 | Thiamethoxam | 253.0 | 126.0* | 16 | 160 | 10.0 |
|
| 253.0 | 186.0 | 8 | 160 | 10.0 |
10 | Thiamethoxam | 291.9 | 211.0* | 4 | 60 | 6.7 |
|
| 291.9 | 181.0 | 18 | 60 | 6.7 |
11 | Dinotefuran metabolite | 159.0 | 102.0* | 2 | 80 | 2.8 |
|
| 159.0 | 67.0 | 12 | 80 | 2.8 |
12 | Acetamiprid_D3 | 226.0 | 126.0 | 14 | 80 | 8.7 |
13 | Dinotefuran_D3 | 206.0 | 160.0 | 0 | 80 | 4.5 |
14 | Thiacloprid_D3 | 295.0 | 214.1 | 4 | 80 | 6.7 |
15 | Thiamethoxam_D3 | 253.0 | 172.0 | 6 | 80 | 7.6 |
16 | Imidacloprid-D4 | 260.0 | 179.0 | 16 | 80 | 8.1 |
17 | thiamethoxam_D4 | 257.0 | 126.0 | 16 | 160 | 10.0 |
Note: * indicates quantifier ion pairs; detection window is ±0.6 min.
Sample Processing
Sample ProcessingWeigh approximately 5.0 g of the sample (accurate to 0.01 g) into a 50 mL stoppered centrifuge tube, and add 50 of the internal standard working solution.μAdd 10 mL acetonitrile and the extraction salt packet. Vortex for 1 min, shake on a shaker for 10 min at 120000 r/min, then centrifuge for 5 min. Transfer the upper ethanol layer to another capped centrifuge tube. Add 10 mL acetonitrile to the aqueous phase and repeat the extraction once. Combine both extracts and bring to volume with 20 mL; mix thoroughly. Pipette 4 mL of the extract into an 15 mL capped centrifuge tube, add 1 mL water, and 200.μFormic acid, vortex for 1 min before purification.
Transfer the entire sample solution into the purification column and allow it to drain by gravity. When the liquid level is nearly dry, add 5 mL of eluent. Once the liquid level in the column is nearly dry again, add 2 mL of eluent (acetonitrile:water = 4:1, v/v). Apply pressure and collect all eluate, then evaporate to near dryness using nitrogen blowdown. Add 1 mL of reconstitution solvent (methanol:water = 1:1, v/v) to dissolve the residue, and pass through 0.22. μMicro-porous membrane filters; proceed to LC-MS/MS analysis.
Standard Curve PreparationTransfer appropriate amounts of the mixed standard intermediate solution into 50 mL centrifuge tubes pre-filled with milk (5.0 g, accurate to 0.01 g) to achieve target compound concentrations of 0–100 in the final volume.μStandard series in g/L. Then, add 50 to each centrifuge tube.μUse the L internal standard mixture; after standing for 30 min, process in the same batch as samples.
Linear Range
No. | Test Item | Retention Time min | Limit of Detection μg/kg | QuantitativeLimit μg/kg | Linear Range ng/mL | Linear Equation 1/x2Weighted | correlation coefficient r2 |
1 | Dinotefuran metabolites | 2.644 | 0.1 | 0.2 | 0.5-200 | Y = 0.270183 * X + 0.0227862 | 0.9970 |
2 | Dinotefuran | 4.383 | 0.1 | 0.2 | 0.5-200 | Y = 0.122949 * X + 6.18326e-06 | 0.9981 |
3 | Imidacloprid Olefin | 6.504 | 0.2 | 0.5 | 1-200 | Y = 0.00765305 * X + 0.00392065 | 0.9905 |
4 | Thiamethoxam | 6.604 | 0.1 | 0.2 | 0.5-200 | Y = 0.0382812 * X + 0.00541449 | 0.9933 |
5 | Imidacloprid urea | 6.923 | 0.1 | 0.2 | 0.5-200 | Y = 0.175557 * X + 0.00414848 | 0.9901 |
6 | Thiamethoxam | 7.525 | 0.2 | 0.5 | 1-200 | Y = 0.109193 * X + 0.0782545 | 0.9983 |
7 | N-desmethyl acetamiprid | 7.777 | 0.2 | 0.5 | 0.5-200 | Y = 0.0801288 * X + 0.0227641 | 0.9946 |
8 | Imidacloprid | 7.978 | 0.02 | 0.05 | 0.5-200 | Y = 0.096822 * X + 0.0132225 | 0.9942 |
9 | Acetamiprid | 8.631 | 0.02 | 0.05 | 0.5-200 | Y = 0.103844 * X + 0.00764437 | 0.9964 |
10 | Flufipyrone | 9.416 | 0.02 | 0.05 | 0.5-200 | Y = 0.0617315 * X + 0.00406104 | 0.9926 |
11 | Thiamethoxam | 9.898 | 0.1 | 0.2 | 0.5-200 | Y = 0.306092 * X + 0.00901243 | 0.9915 |
Precision and Accuracy
Test Item | Add label μg/kg | 1 | 2 | 3 | 4 | 5 | 6 | Precision | Accuracy |
Dinotefuran metabolites | 5 | 4.84 | 4.85 | 4.66 | 4.82 | 4.81 | 4.73 | 1.60% | 95.75% |
| 10 | 10.35 | 10.40 | 10.47 | 10.29 | 10.18 | 10.46 | 1.05% | 103.58% |
| 50 | 47.55 | 48.54 | 49.22 | 48.27 | 49.26 | 49.32 | 1.45% | 97.38% |
| 200 | 190.44 | 188.52 | 193.98 | 193.23 | 189.17 | 189.16 | 1.21% | 95.37% |
Dinotefuran | 5 | 5.39 | 4.75 | 4.80 | 4.82 | 5.26 | 4.79 | 5.60% | 99.41% |
| 10 | 10.08 | 10.17 | 10.18 | 9.75 | 10.20 | 10.34 | 1.95% | 101.21% |
| 50 | 49.57 | 49.05 | 50.61 | 49.12 | 51.13 | 50.75 | 1.80% | 100.08% |
| 200 | 192.22 | 189.16 | 195.50 | 189.26 | 194.02 | 189.16 | 1.45% | 95.78% |
Imidacloprid Olefin | 5 | 4.94 | 5.02 | 4.86 | 5.41 | 5.49 | 5.19 | 4.99% | 103.05% |
| 10 | 11.00 | 9.18 | 11.07 | 10.86 | 11.15 | 9.56 | 8.26% | 104.71% |
| 50 | 54.86 | 51.14 | 49.89 | 53.27 | 47.60 | 52.51 | 5.01% | 103.09% |
| 200 | 217.94 | 203.53 | 215.52 | 216.69 | 206.54 | 221.51 | 3.28% | 106.81% |
Thiamethoxam | 5 | 4.98 | 4.97 | 5.08 | 4.91 | 4.86 | 5.14 | 2.07% | 99.80% |
| 10 | 10.27 | 9.53 | 9.45 | 9.59 | 9.52 | 9.92 | 3.27% | 97.15% |
| 50 | 46.67 | 46.45 | 46.96 | 46.36 | 46.84 | 47.29 | 0.73% | 93.52% |
| 200 | 178.35 | 183.81 | 184.36 | 182.60 | 183.10 | 181.66 | 1.18% | 91.16% |
Imidacloprid Urea | 5 | 4.31 | 4.04 | 4.21 | 4.01 | 4.25 | 4.09 | 2.95% | 82.99% |
| 10 | 11.89 | 10.98 | 11.49 | 11.77 | 11.64 | 11.85 | 2.93% | 116.02% |
| 50 | 44.08 | 43.20 | 43.95 | 46.50 | 44.96 | 44.87 | 2.55% | 89.19% |
| 200 | 212.58 | 198.68 | 203.69 | 197.23 | 203.83 | 203.75 | 2.65% | 101.65% |
Thiamethoxam | 5 | 4.92 | 4.99 | 5.03 | 5.18 | 4.86 | 4.92 | 2.23% | 99.65% |
| 10 | 10.36 | 10.11 | 10.37 | 9.60 | 10.20 | 10.20 | 2.77% | 101.41% |
| 50 | 49.83 | 52.01 | 50.24 | 48.19 | 48.09 | 51.53 | 3.27% | 99.96% |
| 200 | 190.50 | 191.86 | 205.99 | 202.99 | 198.11 | 196.44 | 3.07% | 98.82% |
N-desmethyl acetamiprid | 5 | 4.73 | 5.07 | 4.82 | 4.95 | 5.05 | 5.31 | 4.12% | 99.74% |
| 10 | 10.35 | 10.19 | 10.78 | 10.07 | 10.51 | 10.63 | 2.61% | 104.22% |
| 50 | 48.83 | 56.04 | 54.56 | 46.77 | 55.86 | 55.39 | 7.64% | 105.82% |
| 200 | 214.16 | 202.61 | 219.10 | 203.45 | 211.62 | 219.33 | 3.47% | 105.86% |
Imidacloprid | 5 | 5.06 | 4.86 | 5.05 | 5.22 | 5.08 | 5.08 | 2.26% | 101.17% |
| 10 | 10.21 | 10.45 | 10.20 | 10.36 | 10.19 | 9.84 | 2.05% | 102.08% |
| 50 | 49.64 | 49.15 | 51.08 | 49.82 | 50.41 | 49.05 | 1.55% | 99.72% |
| 200 | 201.90 | 198.53 | 203.14 | 203.24 | 205.84 | 200.21 | 1.26% | 101.07% |
Acetamiprid | 5 | 4.92 | 4.94 | 4.93 | 5.03 | 4.93 | 4.87 | 1.01% | 98.74% |
| 10 | 10.08 | 9.83 | 10.13 | 9.86 | 10.12 | 9.93 | 1.34% | 99.93% |
| 50 | 50.85 | 50.27 | 50.88 | 51.69 | 52.44 | 49.40 | 2.08% | 101.85% |
| 200 | 202.23 | 202.97 | 202.18 | 204.64 | 192.56 | 199.16 | 2.16% | 100.31% |
Flupyfuranone | 5 | 5.00 | 4.90 | 4.88 | 5.08 | 4.88 | 5.02 | 1.68% | 99.24% |
| 10 | 9.90 | 9.27 | 9.34 | 10.05 | 9.47 | 9.85 | 3.40% | 96.45% |
| 50 | 45.33 | 46.63 | 47.43 | 50.72 | 46.22 | 44.68 | 4.55% | 93.67% |
| 200 | 180.43 | 173.50 | 187.21 | 193.31 | 187.31 | 173.13 | 4.49% | 91.24% |
Thiamethoxam | 5 | 4.99 | 4.60 | 4.76 | 5.08 | 5.11 | 4.92 | 4.00% | 98.20% |
| 10 | 9.75 | 9.93 | 10.39 | 9.74 | 9.78 | 9.93 | 2.48% | 99.21% |
| 50 | 49.00 | 49.23 | 46.40 | 46.66 | 51.25 | 51.90 | 4.63% | 98.15% |
| 200 | 182.04 | 179.67 | 181.86 | 181.67 | 182.96 | 185.05 | 0.97% | 91.10% |
Summary
This study establishes an ultra-high-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) system, Anyeep TQ9120, for the analysis of 11 novel neonicotinoid pesticides. Results demonstrate that the method offers excellent sensitivity, stability, and linearity, making it suitable for routine analysis and detection of these compounds.